- 您现在的位置：买卖IC网 > Sheet目录308 > ADZS-21489-EZLITE (Analog Devices Inc)KIT EVAL EZ BOARD ADSP-2148X
Using ADSP-21489 EZ-Board
The watch dog timer resets both the core and internal peripherals. After
an external reset, the WDT must be disabled by default. Software must be
able to determine if the watch dog has been the source of the hardware
reset by interrogating a status bit in the watch dog timer control register.
Be default, the watch timer interface is turned off. In order to use the fea-
ture, a user needs to turn switch SW13 position 8 ON . SW13 connects the
watch dog reset out pin to the ADM708 system reset circuit. See “External
Port Enable Switch (SW13)” on page 2-12 . Special attention must be paid
to this function because it can cause the processor and EZ-Board to
remain in a permanent reset.
Example programs are included in the EZ-Board installation directory to
demonstrate watch dog timer functionality.
Temperature Sensor Interface
Two external pins ( THD_P and THD_M ) of the processor are connected to an
internal thermal diode. The EZ-Board uses ON Semiconductor’s
ADM1032 digital thermometer and under/over temperature alarm to
monitor the processor’s temperature as well as the thermal diode’s (inside
the ADM1032 device). The thermometer uses the I 2 C bus, DPI pins, and
flag pins of the processor. The following DPI and flag pins are used for
temperature monitoring.
? DPI pin 8 ( DPI_P8 ) as the serial clock signal ( SCK )
? DPI pin 7 ( DPI_P7 ) as the serial data signal ( SDA )
? Flag 0 as the IRQ (not used by default)
? Flag 3 as the thermal limit (not used by default)
The two DPI pins are required: the pins are connected to the temperature
sensing monitor via a switch ( SW3 ) and can be shut off if the pins are used
on the expansion II interface. The thermal limit flag is connected to
ADSP-21489 EZ-Board Evaluation System Manual
1-13
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
ADZS-218X-ICE-2.5V
EMULATOR SRL FOR ADDS-218X-ICE
ADZS-BF506F-EZLITE
KIT EVAL EZLITE ADSP-BF506F
ADZS-BF518F-EZLITE
KIT EZ LITE BF512F/14F/16F/18F
ADZS-BF527-EZLITE
BOARD EVAL ADSP-BF527
ADZS-BF533-EZLITE
KIT W/BOARD EVAL FOR ADSP-BF533
ADZS-BF538F-EZLITE
BOARD EVAL FOR ADSP-BF538
ADZS-BF561-EZLITE
BOARD EVAL ADSP-BF561
ADZS-BF592-EZLITE
KIT EVAL EZ LITE ADZS-BF592
相关代理商/技术参数
ADZS-2189M-EZLITE
功能描述:开发板和工具包 - 其他处理器 ADZS-2189M-EZLITE
RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
ADZS-218X-ICE-2.5V
功能描述:EMULATOR SRL FOR ADDS-218X-ICE RoHS:是 类别:编程器，开发系统 >> 内电路编程器、仿真器以及调试器 系列:EZ-ICE® 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:*
ADZS22105
功能描述:RELAY GEN PURPOSE SPST 90A 5V 制造商:panasonic electric works 系列:ADZS 包装:托盘 零件状态:在售 继电器类型:通用 线圈类型:锁存，双线圈 线圈电流:600mA 线圈电压:5VDC 触头外形:SPST-NO（1 A 型） 额定接触（电流）:90A 开关电压:276VAC - 最大 导通电压（最大值）:3.5 VDC 关闭电压（最小值）:- 工作时间:20ms 释放时间:20ms 特性:- 安装类型:底座安装 端子类型:螺丝端子 工作温度:-40°C ~ 85°C 触头材料:银锡氧化物（AgSnO） 线圈功率:3 W 线圈电阻:8.3 Ohms 标准包装:20
ADZS22112
功能描述:RELAY GEN PURPOSE SPST 90A 12V 制造商:panasonic electric works 系列:ADZS 包装:托盘 零件状态:在售 继电器类型:通用 线圈类型:锁存，双线圈 线圈电流:250mA 线圈电压:12VDC 触头外形:SPST-NO（1 A 型） 额定接触（电流）:90A 开关电压:276VAC - 最大 导通电压（最大值）:8.4 VDC 关闭电压（最小值）:- 工作时间:20ms 释放时间:20ms 特性:- 安装类型:底座安装 端子类型:螺丝端子 工作温度:-40°C ~ 85°C 触头材料:银锡氧化物（AgSnO） 线圈功率:3 W 线圈电阻:48 Ohms 标准包装:20
ADZS22124
功能描述:RELAY GEN PURPOSE SPST 90A 24V 制造商:panasonic electric works 系列:ADZS 包装:托盘 零件状态:在售 继电器类型:通用 线圈类型:锁存，双线圈 线圈电流:125mA 线圈电压:24VDC 触头外形:SPST-NO（1 A 型） 额定接触（电流）:90A 开关电压:276VAC - 最大 导通电压（最大值）:16.8 VDC 关闭电压（最小值）:- 工作时间:20ms 释放时间:20ms 特性:- 安装类型:底座安装 端子类型:螺丝端子 工作温度:-40°C ~ 85°C 触头材料:银锡氧化物（AgSnO） 线圈功率:3 W 线圈电阻:192 Ohms 标准包装:20
ADZS-AUDIO-EX3
功能描述:BOARD EXTENDER AUDIO EI3 RoHS:是 类别:编程器，开发系统 >> 配件 系列:EZ-Extender® 标准包装:1 系列:- 附件类型:适配器板 适用于相关产品:RCB230，RCB231，RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
ADZS-AUDIO-EX3
制造商:Analog Devices 功能描述:Audio Extender for EI3
ADZSBF506FEZLITE
制造商:Analog Devices 功能描述:Development Kit Provides Developers With A Cost Effective